vectron international www.vectron.com v. 2006 - 11 - 10 page 1 of 5 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4400 ocxo typical applications features base stations 4 - pin dip test equipment surface mount package optional synthesizers fast warm - up digital switching tcxo replacement for better short term stability previous vectron model numbers 4887, tqdiloc , oc - 400 frequency range 10 mhz ? 16 0 mhz standard frequencies 10; 12, 12.8 , 16.38 4 , 19.44, 20 , 38.88, 51.84, 133 mhz frequency stabilities 1 [at - cut crystal ? standard ? 10 to 160mhz ] parameter min typ max. units operating temp range ordering code vs. o perating temperature range - 100 + 100 ppb - 2 0 ? +70c d10 7 (referenced to +25 c) - 250 +250 ppb - 20 ? +70c d257 - 250 +250 ppb - 40? +85c f257 parameter min typ max. units condition initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / y ear vs. a ging / year - 0 . 5 - 10 - 10 - 10 - 3 00 - 5 00 + 0 . 5 +10 +10 +10 + 3 00 + 5 00 pp m ppb ppb ppb ppb ppb at time of shipment, nominal efc v s 5% load 5% after 30 days of operation 60mhz; after 30 days of operation >60mhz; after 30 days of operation warm - up time 2 minutes to 100ppb of final frequency (1 hour reading) @ +25c frequency stabilities 1 [sc cut crystal ? option ? 10 to 52mhz ] parameter min typ max. units operating temp range ordering code vs. operating temperature range - 10 +10 ppb - 20 ? +70c d108 (referenced to +25 c) - 25 +25 ppb - 20 ? +70c d258 - 50 + 50 ppb - 40? +85c f 508 parameter min typ max. units condition initial tolerance vs. supply vo ltage change vs. load change vs. aging / day vs aging / year vs. aging / year - 0.2 - 10 - 10 - 5 - 100 - 500 +0.2 +10 +10 +5 +100 +500 ppm ppb ppb ppb ppb ppb at time of shipment, nominal efc v s 5% load 5% after 30 days of operation 60mhz; after 30 days of operation >60mhz; after 30 days of operation warm - up time 2 minutes to 100ppb of final frequency (1 hour reading) @ +25c supply voltage (vs) parameter min typ max. units condition ordering code supply voltage [s tandard] 4.75 5 5.25 vdc sv050 supply voltage [option] 11.4 12.0 12.6 vdc sv120 supply voltage [option] 3.135 3.3 3.465 vdc sv033 power consumption 2.5 watts during warm - up 1.0 watts steady state @ +25c
vectron international www.vectron.com v. 2006 - 11 - 10 page 2 of 5 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4400 ocxo rf output parameter min typ max. u nits condition ordering code signal [standard] hcmos rfh load 15 pf signal level (vol) 0.5 vdc with vs=12.0v or 5.0v and 15pf load 0.3 vdc with vs=3.3v and 15pf load signal level (voh) 3.7 vdc with vs=12.0v or 5.0v and 15pf load 2.4 vd c with vs=3.3v and 15pf load duty cycle 45 55 % @ (voh - vol)/2 signal [option] sinewave rfs load 50 output power @3,3v supply volt. 2 5 8 dbm 50 ohm load harmonics power@5v 5 8 - 30 11 dbc dbm 50 ohm load 50 ohm load frequency tuning (efc) 10 to 80mhz parameter min typ max. units condition ordering code 5 tuning range fixed ocxo; no adjust 0 tuning range 5 .0 12 ppm with at cut crystal 1 1 .0 3 ppm with sc cut crystal 1 linearity 5 % tuning slope positive control voltage ran ge 0 2 4 vdc with vs=12.0v or 5.0v control voltage range 0.0 1.4 2.8 vdc with vs=3.3v additional parameters parameter min typ max. units condition phase noise 3 - 65 dbc/hz 1 hz @ 10 mhz - 95 dbc/hz 10 hz - 120 dbc/hz 100 hz - 140 dbc/hz 1 khz - 145 dbc/hz 10 khz weight 8.0 g processing & packing handling & processing note absolute maximum ratings parameter min typ max. units condition supply voltage (vs) 7.0 v with vs=5.0vdc 28 v with vs=12vdc 7.0 v with vs=3.3 vdc output load 50 pf operable temperature range - 55 +85 c storage temperature range - 55 +125 c
vectron international www.vectron.com v. 2006 - 11 - 10 page 3 of 5 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4400 ocxo enclosures type a type b package codes: code height ?h? pin length ?l? code height ?h? pin length ?l? a1 9. 3 5 . 85 min. b1 1 0 . 4 na a2 8. 3 5.85 min. dimensions: mm "h" max 18.48 12.70 20.32 2.5 2.5 15.24 1 7 8 8 14 10.81 dimensions: imm pin connections pin connections 1 electrical frequency adjust input (efc) 1 electrical frequency adjust input (efc) 7 ground (case) 7 ground (case) 8 rf output 8 rf ou tput 14 supply voltage input 14 supply voltage input standard shipping method (for type b enclosures) *bei w 24 mm nur untere lochreihe * by w 24 mm only lower hole line gurtoberseite tape upper side gurtunterseite tape buttom side abwickelrichtung unwinding direction lage im gurt position in tape pin 1 a x p b k production tolerance complying din iec 286 - 3 enclosure type tape width w [mm] quantity per meter quantity per reel dimension p type b 44 50 300 20
vectron international www.vectron.com v. 2006 - 11 - 10 page 4 of 5 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4400 ocxo recommended reflow profile profile feature pb - free assembly /sn - pb assembly profile feature pb - free assembly /sn - pb assembly average ramp - up rate (t l to tp) 3c/second max. time 25c to peak temperature 8 minutes max. preheat - temperature min ts min ) - temperature min ts max ) - time (min to max) (ts) 150c 200c 60 - 180 seconds time maintainted above - temperature (t l ) - time ( t l ) 217c 60 - 150 seconds ts max to t l - ramp - up rate 3c/second max. time maintainted above - temperature (t l ) - time (t l ) 217c 60 - 150 seconds time within 5c of actual peak temperature (tp) 20 - 40 seconds peak temperature (tp) max 260c ramp - down rate 6c/second max. note: all temperatures refer to topside of the package, measured on the package body surface. critical zone t l to t p ramp up ramp down t 25c to peak t p t e m p e r a t u r e t l 25 time ts ts ts preheat tp t l
vectron international www.vectron.com v. 2006 - 11 - 10 page 5 of 5 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 watts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax c4400 ocxo how to order this product: step 1 use this worksheet to forward the following information to your factory representative : model stability code supply voltage code rf output code package code frequency control/ enable frequency c4400 d107 sv050 rfh a1 1 10mhz vs.operat. temp. r ange signal: tuning range: d107: 100ppb - 20 ?+70c rfh: hcmos 0: fixed ocxo; no adjust d257: 250ppb - 20 ?+70c 1 : 5.0 ppm.. 12 ppm (at) f257: 250ppb - 40 ?+85c 1 : 1.0 ppm .. 3.0 ppm (sc) d108: 10ppb - 20 ?+70c d258: 25ppb - 20 ?+70c enclosure: f508: 50ppb - 40 ?+85c a1: h: 9. 3 l: 5.85min a2: h: 8.3 l: 5.85min supply: a3: h: 10.4 l: na sv050: 5v sv120: 12v sv033: 3.3v step 2 the factory representative will then respond with a vectron model number in the following configuration: model package code dash dash number c4400 [customer speci fied package code] - [factory generated 4 digit number] typical p/n = c4400 a1 - 0001 notes: 1 contact factory for improved stabilities or additional product options. not all options and codes are available at all frequencies. 2 unless otherwise state d all values are valid after warm - up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c) 3 phase noise degrades with increasing output frequency. 4 subject to technical modification. 5 contact fac tory for availability.
|
